Stuck in standby

About F10S pictures, software, upgrades, tutorials, any technology and the use of the problem
Post Reply
Oggy70
Posts: 1
Joined: Sat Sep 16, 2017 7:05 pm

Stuck in standby

Post by Oggy70 » Sat Sep 16, 2017 7:20 pm

Hi all, my new ibravebox f10s on 2nd turn on. Just has a red light on the front it will not turn with the power button or remote. Anyone got any ideas. Looked on the web but not much info around. Anyone had similar problems. Thanks in advance :D

wwesaa
Posts: 5
Joined: Wed Jun 07, 2017 10:09 am

Re: Stuck in standby

Post by wwesaa » Sun Sep 17, 2017 8:35 am

There is no similar problem.. :lol:

brainz
Posts: 3
Joined: Sat May 19, 2018 2:23 am

Re: Stuck in standby

Post by brainz » Sat Jun 02, 2018 2:25 am

I have the same problem It quit while I was watching it. Now it will not turn on, just has red light on front.

Champion Sparks
Posts: 6
Joined: Mon May 14, 2018 3:17 pm

Re: Stuck in standby

Post by Champion Sparks » Wed Jun 06, 2018 3:20 pm

:| Had one stuck in standby because the 75 ohm coax was shorted or the LNB,Diseqc switch was shorted, or drawing to much current. Hope this helps ?

lzp
Posts: 19
Joined: Thu Mar 01, 2018 12:59 am

Re: Stuck in standby

Post by lzp » Thu Jun 07, 2018 12:41 am

eprom?

brainz
Posts: 3
Joined: Sat May 19, 2018 2:23 am

Re: Stuck in standby

Post by brainz » Fri Jun 08, 2018 8:24 pm

brainz wrote:
Sat Jun 02, 2018 2:25 am
I have the same problem It quit while I was watching it. Now it will not turn on, just has red light on front.
[/quote
Found the problem. The power adapter had failed. 12 volt dropped to 9 volts. Found 470/16volt capacitor had blown up in adapter. Replaced it with 470/25volt capacitor. Now working fine.

brainz
Posts: 3
Joined: Sat May 19, 2018 2:23 am

Re: Stuck in standby

Post by brainz » Sun Jul 08, 2018 12:45 pm

brainz wrote:
Fri Jun 08, 2018 8:24 pm
brainz wrote:
Sat Jun 02, 2018 2:25 am
I have the same problem It quit while I was watching it. Now it will not turn on, just has red light on front.
[/quote
Found the problem. The power adapter had failed. 12 volt dropped to 9 volts. Found 470/16volt capacitor had blown up in adapter. Replaced it with 470/25volt capacitor. Now working fine.
It worked fine, but now the sound has quit. Any fixes for that?

cpr43
Posts: 19
Joined: Sat Jan 27, 2018 8:19 pm

Re: Stuck in standby

Post by cpr43 » Mon Jul 09, 2018 1:58 pm

To recover stuck units with PC
Attachments
iBRAVEBOX_F10S_RS232_Tools.rar
(187.51 KiB) Downloaded 11 times

Post Reply